Arduino Fan Control
Detailed App Info:
Application Description
The Arduino Fan Control app allows you to monitor and control almost any fan with a sleek and modern interface. Transforming the fan into a smart, internet connected device!
Arduino Fan, once configured, gives you the ability to monitor the temperature of the room, along with the maximum and minimum temps the room has reached.
The app allows you to control the fan with three simple settings, on, off and auto. Auto mode lets the fan decide when it should turn on, or off, based on the current temperature of the room. The app will refresh as often as you specify.
Once you have followed all the setup instructions all you have to do is tell the app where to find your Arduino using its IP address.
Available exclusively on the App Store!
You can find the instructions at the support website bellow.
Arduino board and Arduino Ethernet Shield required.
Special thanks to Joseph Mesite for the artwork creation.
Arduino Fan, once configured, gives you the ability to monitor the temperature of the room, along with the maximum and minimum temps the room has reached.
The app allows you to control the fan with three simple settings, on, off and auto. Auto mode lets the fan decide when it should turn on, or off, based on the current temperature of the room. The app will refresh as often as you specify.
Once you have followed all the setup instructions all you have to do is tell the app where to find your Arduino using its IP address.
Available exclusively on the App Store!
You can find the instructions at the support website bellow.
Arduino board and Arduino Ethernet Shield required.
Special thanks to Joseph Mesite for the artwork creation.
Requirements
Your mobile device must have at least 357.41 KB of space to download and install Arduino Fan Control app. Arduino Fan Control is available on iTunes for $0.00
If you have any problems with installation or in-app purchase, found bugs, questions, comments about this application, you can visit the official website of David Paquette at http://github.com/dpaquette01/Arduino-Fan-Control-Server.
Copyright © 2013 David Paquette
