Building a set of stairs is a project almost every Do It Yourselfer is faced with at some point. Hiring a contractor can cost thousands, but building a set of stairs can be very tricky with terms like overall riser, tread, riser and stringer many do it yourselfers struggle.

This is where DIYStairs come in.

Create a set of stairs for your deck, patio, entry or any other stair projects.

DIYStairs guides you through the entire process and even has a calculator to help with figuring out the step height.

The Process is simple:

Find Overall Height - Measure from the top of the deck to the ground.

Calculate Riser Height - Use the custom calcuator to determine how many step you need and the height of each step.

Layout First Stringer - Use framing square and stair gauges layout the stringer.

Cut it Out - Cut the first stringer out being careful to cut on the waste side of the line.

Test It -Do a test fit to see how it works.

Mark Other Stringers - Mark out the other stringers using the first as a template. Cut them out as your did with the first one.

Assembly - Attach 2x10 to the bottom and the top of each stringer.

Attach Stairs - Attach the stairs to the deck. Use the reference marks from your test fit to place stairs correctly.

Install Treads - Start at the bottom and work your way up to the top.

All the steps you need to successfully build your own set of stairs

Complete Projects Like:

Deck stairs

New stairs at your front entryway or any other door to your home or cottage

Build a set of portable stairs for your RV or shop.

Landscaping stairs

and more

DIYStairs can save you time and money, help you avoid contractor costs and establish you as an expert Do It Yourselfer.