LectroRM
Detailed App Info:
Application Description
Remote control for Lectrosonics® SM transmitters
Control audio level, frequency, sleep mode, and lock mode remotely by playing a generated tone into the microphone attached to the transmitter.
Control transmit power setting on new Lectrosonics transmitters with firmware version 4.0 or higher where high power modes are available (press the info button to enable)
Features
- Simplistic design for fast and easy use
- Sounds are generated dynamically, not loaded from memory
- Volume control on each page for easy access
*Lectrosonics® SM transmitters must be configured to accept remote control tones. Hold down arrow while turning on the transmitter. Then select "rc on". The original SM requires firmware version 1.5 (released 12/05) to respond to the remote. The firmware version number appears upon turning on the unit. SMa, SMQV and SMV models all support remote control.
Lectrosonics® is a registered trademark of Lectrosonics Inc. Lectrosonics Inc. does not support or endorse this app.
Control audio level, frequency, sleep mode, and lock mode remotely by playing a generated tone into the microphone attached to the transmitter.
Control transmit power setting on new Lectrosonics transmitters with firmware version 4.0 or higher where high power modes are available (press the info button to enable)
Features
- Simplistic design for fast and easy use
- Sounds are generated dynamically, not loaded from memory
- Volume control on each page for easy access
*Lectrosonics® SM transmitters must be configured to accept remote control tones. Hold down arrow while turning on the transmitter. Then select "rc on". The original SM requires firmware version 1.5 (released 12/05) to respond to the remote. The firmware version number appears upon turning on the unit. SMa, SMQV and SMV models all support remote control.
Lectrosonics® is a registered trademark of Lectrosonics Inc. Lectrosonics Inc. does not support or endorse this app.
Requirements
Your mobile device must have at least 296.84 KB of space to download and install LectroRM app. LectroRM was updated to a new version. Purchase this version for $19.99
If you have any problems with installation or in-app purchase, found bugs, questions, comments about this application, you can visit the official website of New Endian LLC James LAFARGE at http://www.newendian.com.
Copyright © 2011 New Endian, LLC
