MyLedControl
Detailed App Info:
Application Description
Infr and Adhoc networking mode are supported.
Using IEEE802.11 in the TCP/IP protocol stack.
Automatic network connection , and formation of networks are supported
Embedded Web Server, can set up the PI address and Networking for the luminair by webpage.
2.4GISM frequency band , working distance 150meter.
Can connect totally 16 sets of luminairs via the internet.
Online programing the lighting color and pattern.
Can set weekly day scenario mode.
Can memorize the current partens and color when power off.
No flashing dimming, multiple scene lighting.
Supporting multiterminal control single light.
Softwair Description
1. Connect the luminair to the Wifi controller, and the Wifi controller to the power supply, turn on the luminair,Wifi Connection indicator light goes out .
2. To Find LEDNet network and set up the Wifi connection interface.
IP address 192.168.1.X (X Range: 2-50)
subnet mask 255.255.255.0
Router 192.168.1.1
DNS 192.168.1.1
3. Connect the LEDNet network ,the controller Wifi connection indicator will light on.
4. Open the software, select the luminair you want to control.
Using IEEE802.11 in the TCP/IP protocol stack.
Automatic network connection , and formation of networks are supported
Embedded Web Server, can set up the PI address and Networking for the luminair by webpage.
2.4GISM frequency band , working distance 150meter.
Can connect totally 16 sets of luminairs via the internet.
Online programing the lighting color and pattern.
Can set weekly day scenario mode.
Can memorize the current partens and color when power off.
No flashing dimming, multiple scene lighting.
Supporting multiterminal control single light.
Softwair Description
1. Connect the luminair to the Wifi controller, and the Wifi controller to the power supply, turn on the luminair,Wifi Connection indicator light goes out .
2. To Find LEDNet network and set up the Wifi connection interface.
IP address 192.168.1.X (X Range: 2-50)
subnet mask 255.255.255.0
Router 192.168.1.1
DNS 192.168.1.1
3. Connect the LEDNet network ,the controller Wifi connection indicator will light on.
4. Open the software, select the luminair you want to control.
Requirements
Your mobile device must have at least 772.24 KB of space to download and install MyLedControl app. MyLedControl is available on iTunes for $0.00
If you have any problems with installation or in-app purchase, found bugs, questions, comments about this application, you can visit the official website of Shenzhen LEDMY CO.,Ltd at http://www.ledmy.com.
Copyright © Shenzhen LEDMY CO.,Ltd
